10-8 Video Downloads

Looking for software for your 10-8 Video, LLC. product? Then you’ve found the right place. The links below will always have the latest version of the 10-8 Player for the PC. Feel free to download and install on any PC that will be used for viewing 10-8 based video.

Note that it can not be used for any other file formats. It will only read videos from the 10-8 System.

For technical questions or support, you can also email us at service@10-8video.com.


10-8 HD4SD MDVR

Software

Download 10-8 HD4SD Software ~39.5 MB (ZIP)

Latest DVR Firmware

Download T17032303 ~19.7 MB (ZIP)

Manuals

Download/Install User Manual for users operating the 10-8 HD4SD MDVR ~7 MB (PDF)


BC-1 & BC-2 Body Cameras

Software

The software is included with the initial shipment of body cams but a supervisor will need to contact 10-8 Video either by email at service@10-8video.com or phone (1-888-788-1048) for a copy.

Software Notes

  • The software MUST be running before connecting the Body Camera to the computer.
  • If the software is not running before the Body Camera is connected, the Body Camera will simply charge its battery.
  • Exiting the software while the Body Camera is connected to the computer will enter the Body Camera back into charging mode.

Manuals

Download BC-1 Body Camera User Manual ~1.5 MB (PDF)

Download BC-2 Body Camera User Manual ~9.3 MB (PDF)


2 Channel / Dual SD Card Version

Software

If your system supports 2 cameras and dual SecureDigital (SD) cards this is the software you need to play the video.

Download 10-8 Player 2 Channel / Dual SD Card ~8.1 MB (ZIP)

Firmware

Firmware Update – ver 13103001 – 10/30/2013 ~11.8 MB (ZIP)

Instructions

  1. Right click on the link above and choose "Save Link As…" and save the file to your hard drive.
  2. Next, put the file onto an SD card and place in the DVR.
  3. Power up the system and the DVR will see the file and automatically upgrade the firmware.
  4. The screen will show "Upgrading" for a few minutes and then re-boot.
  5. Once the system has booted, go to the "Tools" Menu then select "Defaults".
  6. Select "Reset Defaults". This will apply the proper settings in the new firmware update.

Manuals

Full installation and user manual for users operating the 2 Channel Double SecureDigital (SD) Card version of the system.

Download Software Manual ~4.3 MB (PDF)

10-8 Brochure

You can download and print our latest brochure for 10-8 Video recording system.

*Free Shipping for US only.

Download Brochure ~0.25 MB (PDF)


SecureDigital (SD) Version

Software

Download 10-8 Player (SD) ~10 MB (ZIP)

Manuals

10-8 Install Guide

Need help installing 10-8 video system? Download this comprehensive install guide for the dash cam.

Download Install Guide ~3.0 MB (PDF)

10-8 User Manual (Short)

Short 4-page guide for the end user.

Download Operator Manual ~0.25 MB (PDF)

10-8 User Manual for SecureDigital (SD) Units

Full user manual for users operating the SecureDigital (SD) version of the system.

Download SD User Manual ~7.0 MB (PDF)

10-8 Install and User Manual for 2.4gHz Mic

User and install guide for users of the 2.4gHz Mic.

Download 2.4gHz Install & User Manual ~0.15 MB (PDF)

10-8 Brochure

You can download and print our latest brochure for 10-8 Video recording system.

*Free Shipping for US only.

Download Brochure ~0.25 MB (PDF)


Compact Flash (CF) Version

Software

If your system uses CompactFlash (CF) cards this is the software you need to play the video.

Download 10-8 Player (CF) ~10 MB (ZIP)